Beat Simply functional

Solid, all of a piece. Thus, the design of the BEAT is best described. The compact and powerful analog amplifiers are well processed and good „motorized“. The clean circuit boards with SMD layout is well thought out and structurally characterized in the small but effective power output. As known from the iPaul series also the top-control principle is used.

 

Products

271039
New!

Beat 1+

Part No.: 271039

Mono Subwoofer Amplifier Class D
1 x 600 Watts @ 1 Ohm
1 x 600 Watts @ 2 Ohm
1 x 400 Watts @ 4 Ohm
24 dB Subsonic: 15 Hz – 50 Hz
24 dB Low Pass: 50 Hz – 150 Hz
Dimensions (LxWxH): 241 x 200 x 56 mm

Output power stereo 4 Ω -
Output power stereo 2 Ω -
Output power mono 4 Ω 1 x 400 Watt RMS
Output power mono 2 Ω 1 x 600 Watt RMS
Output power mono 1 Ω 1 x 600 Watt RMS
Total Harmonic Distortions THD+N <0,2 %
Signal / Noise Ratio >90 dBA Bewertung
Frequency Response -3 dB 15 Hz – 250 Hz
Input Sensitivity Level In 250 mV - 6 V
Input Sensitivity High Level In 6V / 10V
Auto Remote via High Level In Ja
High-pass / Subsonic 15 Hz - 50 Hz, 24 dB/Okt.
High-pass / Subsonic - Front -
High-pass / Subsonic - Rear -
Low-pass 50 Hz - 150 Hz, 24 dB/Okt.
Band-pass 15 Hz - 150 Hz, 24 dB/Okt.
Bass Boost 0 / 3 / 6 dB
Phaseshifter 0° - 180° stufenlos regelbar
Remote -
Suitable Speaker Impedance Stereo [Ω] -
Suitable Speaker Impedance Mono [Ω] 1 x 4 / 1 x 2 / 1x 1 möglich
Suitable Speaker Impedance Tri-Mode (Woofer + Satellites) [W] -
Damping Factor @ 4 Ω > 160
Operational voltage 11 V - 16 V DC
Input Current max. @ 14.4 V 60 A bei 1% THD
Input Current Remote 2,5 mA
Idle current without signal 0,5 A
Temperature control heatsink 85°C Abschaltung
Short circuit protection – Overload Sofortabschaltung
Softstart-Muting on / off 1s Einschaltverzögerung
Dimensions (W x H x D) 241 x 56 x 200 mm
weight 2,6 kg
Approval number -
271044
Test Winner

Beat 2

Part No.: 271044

Two Channel Amplifier Class AB
2 x 180 Watts @ 2 Ohm
2 x 120 Watts @ 4 Ohm
1 x 370 Watts @ 4 Ohm bridged
12 dB High Pass: 25 Hz – 5 kHz
12 dB Low Pass: 50 Hz – 5 kHz
Dimensions (LxWxH): 241 x 200 x 56 mm

Output power stereo 4 Ω 2 x 120 Watt RMS
Output power stereo 2 Ω 2 x 180 Watt RMS
Output power mono 4 Ω 1 x 370 Watt RMS
Output power mono 2 Ω -
Output power mono 1 Ω -
Total Harmonic Distortions THD+N <0,04 %
Signal / Noise Ratio >95 dBA Bewertung
Frequency Response -3 dB 25 Hz – 35 kHz
Input Sensitivity Level In 250 mV - 6 V
Input Sensitivity High Level In 6V / 10V
Auto Remote via High Level In Ja
High-pass / Subsonic 25 Hz - 5 kHz, 12 dB/Okt.
High-pass / Subsonic - Front -
High-pass / Subsonic - Rear -
Low-pass 50 Hz - 5 kHz, 12 dB/Okt.
Band-pass 25 Hz – 5 kHz, 12 dB/Okt.
Bass Boost 0 / 3 / 6 dB
Phaseshifter 0° - 180° stufenlos regelbar
Remote -
Suitable Speaker Impedance Stereo [Ω] 2 x 4 / 2 x 2 möglich
Suitable Speaker Impedance Mono [Ω] 1 x 8 / 1 x 4 möglich
Suitable Speaker Impedance Tri-Mode (Woofer + Satellites) [W] 1 x 4 + 2 x 4 Tri-Mode
Damping Factor @ 4 Ω > 200
Operational voltage 11 V - 16 V DC
Input Current max. @ 14.4 V 38 A bei 1% THD
Input Current Remote 15 mA
Idle current without signal 0,7 A
Temperature control heatsink 85°C Abschaltung
Short circuit protection – Overload Sofortabschaltung
Softstart-Muting on / off 1s Einschaltverzögerung
Dimensions (W x H x D) 241 x 56 x 200 mm
weight 2,4 kg
Approval number -
271046

Beat 4

Part No.: 271046

Four Channel Amplifier Class AB
4 x 150 Watts @ 2 Ohm
4 x 100 Watts @ 4 Ohm
2 x 300 Watts @ 4 Ohm bridged
12 dB High Pass: 25 Hz – 5 kHz
12 dB Low Pass: 50 Hz – 5 kHz
Dimensions (LxWxH): 250x 200 x 56 mm

Output power stereo 4 Ω 4 x 100 Watt RMS
Output power stereo 2 Ω 4 x 150 Watt RMS
Output power mono 4 Ω 2 x 300 Watt RMS
Output power mono 2 Ω -
Output power mono 1 Ω -
Total Harmonic Distortions THD+N <0,04 %
Signal / Noise Ratio >95 dBA Bewertung
Frequency Response -3 dB 25 Hz – 35 kHz
Input Sensitivity Level In 250 mV - 6 V
Input Sensitivity High Level In 6V / 10V
Auto Remote via High Level In Ja
High-pass / Subsonic 25 Hz - 5 kHz, 12 dB/Okt.
High-pass / Subsonic - Front -
High-pass / Subsonic - Rear -
Low-pass 50 Hz - 5 kHz, 12 dB/Okt.
Band-pass 25 Hz – 5 kHz, 12 dB/Okt.
Bass Boost 0 / 3 / 6 dB
Phaseshifter 0° - 180° stufenlos regelbar
Remote -
Suitable Speaker Impedance Stereo [Ω] 2 x 4 / 2 x 2 möglich
Suitable Speaker Impedance Mono [Ω] 1 x 8 / 1 x 4 möglich
Suitable Speaker Impedance Tri-Mode (Woofer + Satellites) [W] 1 x 4 + 2 x 4 Tri-Mode
Damping Factor @ 4 Ω > 200
Operational voltage 11 V - 16 V DC
Input Current max. @ 14.4 V 52 A bei 1% THD
Input Current Remote 15 mA
Idle current without signal 0,7 A
Temperature control heatsink 85°C Abschaltung
Short circuit protection – Overload Sofortabschaltung
Softstart-Muting on / off 1s Einschaltverzögerung
Dimensions (W x H x D) 250 x 56 x 200 mm
weight 2,5 kg
Approval number -

Common features

  • Easy adjustment due to Top Control
  • Class GH switching for warm sound characteristics, large power output at small required space  (only 2- and 4-Channel Models)
  • Performance amplifier with integrated high-current MOSFET-switch power supply
  • Amplifier design for minimal noise
  • Reversible safety switch-off with thermal monitoring
  • Safety switch-off with DC current to loudspeakers
  • Safety switch-off for loudspeaker short-circuit and loudspeaker under impedance
  • Softstart remote muting for suppression of switch-on peaks
  • High-tech SMD built structure with low coupling conductive wiring
  • Palladium-plated 20 mm² power and 10 mm² loudspeaker connection
  • Interference-proof certified by European CE-Standard
  • Phase Shifter 0° to 180°
  • Signal Noise Ratio more than 90 dBA
  • Operating Voltage 11V – 16V
  • Integrated flat fuse in accordance with DIN-standard, replaceable from outside

Power Section

Beat-innen-(4)

Top Control

Beat-Gehaeuse-(4)