Profi Line Completely different

The new rainbow PROFI line. Completely different. Experience music in a new way.
Visually, acoustically, dynamically. Made in Germany.
Sometimes, the shape and the facts speak for themselves…
This also applies to the performance of the new rainbow PROFI line.
Technological progress, which culminates in a new design and highlights sound.

Products

231653
New!

PL-M3P

Part No.: 231653

3,5 inch (9 cm) Midrange Set
Phase Plug
Max. 80 Watt
Frequency Response: 180 Hz – 15 kHz
Datasheet

Peak power -
Power rating 40 Watt
Minimum amplifier power 20 Watt
Sensitivity 88 dB 1W/1m
Frequency response 180 - 15.000 Hz
Impedance 4 Ohm
Slope -
Crossover frequency -
Tweeter Attenuation -
Midrange Attenuation -
Variable Low Pass -
Thermal protection -
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
External Ø with edges -
Installation Ø -
Fastening -
Name PL-M3P
Mounting depth w/o / w. ring 35 mm
External Ø with edges -
External Ø with edges 91 mm
Installation Ø 78 mm
Fastening 83 mm
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
Installation Ø -
Fastening -
231651
New!

PL-T28

Part No.: 231651

1,1 inch (28 mm) Tweeter Set
Stainless Steel, hand polished
including special Mounting Rings
Frequency Response: 1 kHz – 35 kHz
Datasheet

Peak power -
Power rating 15 Watt
Minimum amplifier power with recommended Crossover
Sensitivity 92 dB 1W/1m
Frequency response 1.000 - 35.000 Hz
Impedance 4 Ohm
Slope -
Crossover frequency -
Tweeter Attenuation -
Midrange Attenuation -
Variable Low Pass -
Thermal protection -
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
External Ø with edges -
Installation Ø -
Fastening -
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
External Ø with edges -
Installation Ø -
Fastening -
Name PL-T28
Mounting depth w/o / w. ring 36 mm
External Ø with edges 57 mm
Installation Ø 52 mm
Fastening -
231657
New!

PL-W6C

Part No.: 231657

6.5 inch (16,5 cm) Woofer
Crystal Cone
Max. 180 Watt
Frequency Response: 33 Hz – 4 kHz
Datasheet

Peak power -
Power rating 120 Watt
Minimum amplifier power 40 Watt
Sensitivity 87 dB 1W/1m
Frequency response 33 - 4.000 Hz
Impedance 4 Ohm
Slope -
Crossover frequency -
Tweeter Attenuation -
Midrange Attenuation -
Variable Low Pass -
Thermal protection -
Name PL-W6C
Mounting depth w/o / w. ring 78 mm
External Ø with edges 166 mm
External Ø with edges -
Installation Ø 143 mm
Fastening 156 mm
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
External Ø with edges -
Installation Ø -
Fastening -
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
Installation Ø -
Fastening -
231656
New!

PL-W6P

Part No.: 231656

6.5 inch (16,5 cm) Woofer
Phase Plug
Max. 180 Watt
Frequency Response: 35 Hz – 5 kHz
Datasheet

Peak power -
Power rating 120 Watt
Minimum amplifier power 40 Watt
Sensitivity 88 dB 1W/1m
Frequency response 35 - 5.000 Hz
Impedance 4 Ohm
Slope -
Crossover frequency -
Tweeter Attenuation -
Midrange Attenuation -
Variable Low Pass -
Thermal protection -
Name PL-W6P
Mounting depth w/o / w. ring 78 mm
External Ø with edges 166 mm
External Ø with edges -
Installation Ø 143 mm
Fastening 156 mm
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
External Ø with edges -
Installation Ø -
Fastening -
Name -
Mounting depth w/o / w. ring -
External Ø with edges -
Installation Ø -
Fastening -

The Woofer PL-W6P

  • rainbow compound-rubber W-surround, with low distortion and high excursion and linearity
  • Light and strong multi layer foam cone, to prevent resonances on surface, coated by hand
  • Full aluminum phase plug, designed to optimize frequency response and additional cooling
  • Symmetric lead wire spider, to prevent coil wobbling
  • Titan 37 mm diameter voice coil former with CCA coil wire, to reduce moving mass and low Rms
  • Copper control rings, to optimize impedance and very low distorsions
  • Aluminum-die-cast basket, designed for high linear excursion and optimized airflow
  • Multi vented magnet system prevent thermal compression
  • Speaker screw terminal for 8 mm² speaker cables
231656_detail

The Woofer PL-W6C

  • rainbow compound-rubber W-surround, with low distortion and high excursion and linearity
  • Aluminum crystal look cone, black anodized, aluminum-paper/compound for extreme depth
  • Symmetric lead wire spider, to prevent coil wobbling
  • Titan 37 mm diameter voice coil former with CCA coil wire, to reduce moving mass and low Rms
  • Copper control rings, to optimize impedance and very low distorsions
  • Aluminum-die-cast basket, designed for high linear excursion and optimized airflow
  • Multi vented magnet system prevent thermal compression
  • Speaker screw terminal for 8 mm² speaker cables
231657_detail

The MIDRANGE

  • rainbow compound-rubber W-surround, with low distortion and high excursion and linearity
  • Light and strong multi layer cone, to prevent resonances on surface, coated by hand
  • Full aluminum phase plug, designed to optimize frequency response and additional cooling
  • Symmetric lead wire spider, to prevent coil wobbling
  • Titan 25 mm diameter voice coil former with CCA coil wire, to reduce moving mass and low Rms
  • Aluminum-die-cast basket, designed for low depth and optimized airflow
  • Multi vented U-Yoke neodym magnet system with optimized airflow
  • Speaker screw terminal for 4 mm² speaker cables
  • Stainless steel mounting ring (polished) with grill (optional)
231653_detail

The Tweeter

  • Stainless steel housing for very low distortion, CNC crafted and polished by hand
  • Multi part housing with special acoustic details to optimize frequency response
  • Closed volume for optimized behavior and low resonance frequency
  • Silk dome, sound coated by hand
  • High energy neodymium magnet
  • Vented magnet system to connect tweeter to the accoustic volume
  • Audio viscous damping with Merino Wool and other special acoustic material
  • Ferrofluid free for fast an precise pulse response
  • Speaker screw terminal for 4 mm² speaker cables
  • Unique stainless steel mounting ring to secure the tweeter
231651_detail